Jaguar E pace Reset Tyre Monitor / Calibration Info
Resetting of the TPMS Tyre Pressure Monitoring System is not required on vehicles with pressure sensors that are attached to the inner (not visible) part of the valve.
To reset the system, adjust the tyre pressures to manufactures setting and driving the vehicle should reset it. This is the same procedure when new tyre are fitted.
*Not all vehicles have a Tyre Pressure Monitoring System (TPMS) fitted.
*If any of the wheels or tyres have been removed, the displayed tyre pressures may not be valid.
Drive the vehicle for at least 15 minutes in order to re-calibrate the system. The Tyre Pressure Monitoring System (TPMS) can be adjusted for Light load and Heavy load.
The TPMS can be adjusted via the Vehicle info, Tyre information, and TPM load setting instrument panel menus.
Use the menu control buttons on the left side of the steering wheel to display and navigate through the instrument panel menus.
*Wheels fitted with a TPMS can be visually identified by the external metal lock nut and valve, see image (1)
The instrument panel can be used to display the recommended cold tyre pressures for the vehicle. The tyre pressure look-up table can be accessed via the Vehicle info, Tyre information and Recommended pressures menus